Ultraviolet absorber clear

UV Derma Vigil Clear

  • Category : Anti-UV
  • Type : Not reflective
  • Shades : Colorless
  • % Light transmission : 89%
  • % Light reflection - outside : 9%
  • % Total solar energy rejected : 17%
  • UV rejection : > 99.9%
Roll width
Roll length

Demonstration Video

Action on the infrared spectrum -- UV DermaVigil Clear

IR rejection test under controlled environment

The infrared lamp (75W) heats two steel plates connected to a thermometer, the whole being placed behind a glass plate (4mm).
The adhesive film presented on this page is stuck on the right side.
Actual test duration: 30 min

info

If the message "This video is not available" appears, refresh the page to see the video.

Data sheet

Simple glazing
clear glass 4mm
Double glazing
clear glass 4/16/4mm
Optical property Not reflective
Shades (out/in) Colorless
Face of application on glazing Inside
Adhesive type HPRA
% Light Transmission 89 81
% Glare reduction 01 01
% Light reflection (out/in) 9/9 15/16
Emissivity value 0.89
Winter value U (W/m²°K) 5.70 2.70
Value of solar g factor 0.83 0.75
Shading coefficient 0.96 0.86
% Transmission of solar energy 81 71
% Reflection of solar energy 8 14
% Absorption of solar energy 11 15
% Total solar energy rejected 17 25
% UV Transmission < 0.1
Colour Rendering Index 99 99
Film thickness (µm) 45
Limited warranty (years) 7

Compatibility on glazing

UV DermaVigil IN NRC HPRA
- Preapproved  |  - Recommended study  |  - Not approved
Single glazing
Clear or tinted
Double glazing
Clear or tinted
Double glazing
Clear Low-E #2
Double glazing
Clear Low-E #3
UV DermaVigil IN NRC HPRA

Data sheet

Type of medium Glass
Application on glazing Interior
Adhesive type HPRA
Optical property Not reflective
Visibility Transparent
Glare problem No
Heat problem in summer No
Thermal insulation in winter No - Not necessary
Solar heat gain in winter Yes - Keep
Limit fading UV