Neutral sputtered medium

Umbra 40

  • Category : Solar
  • Type : Not reflective
  • Shades : Tinted
  • % Light transmission : 39%
  • % Light reflection - outside : 18%
  • % Total solar energy rejected : 53%
Roll width
Roll length

Demonstration Video

Action on the infrared spectrum -- umbra 40 IN

IR rejection test under controlled environment

The infrared lamp (75W) heats two steel plates connected to a thermometer, the whole being placed behind a glass plate (4mm).
The adhesive film presented on this page is stuck on the right side.
Actual test duration: 30 min

info

If the message "This video is not available" appears, refresh the page to see the video.

Data sheet

Simple glazing
clear glass 4mm
Double glazing
clear glass 4/16/4mm
Optical property Not reflective
Shades (out/in) Tinted
Face of application on glazing Inside
Adhesive type CDA
% Light Transmission 39 36
% Glare reduction 57 56
% Light reflection (out/in) 18/15 23/16
Emissivity value 0.88
Winter value U (W/m²°K) 6.00 2.73
Value of solar g factor 0.47 0.60
Shading coefficient 0.54 0.68
% Transmission of solar energy 35 31
% Reflection of solar energy 16 20
% Absorption of solar energy 49 49
% Total solar energy rejected 53 40
% UV Transmission < 1
Colour Rendering Index 99 98
Film thickness (µm) 50
Limited warranty (years) 10

Compatibility on glazing

umbra 40 IN NRT CDA
- Preapproved  |  - Recommended study  |  - Not approved
Single glazing
Clear or tinted
Double glazing
Clear or tinted
Double glazing
Clear Low-E #2
Double glazing
Clear Low-E #3
umbra 40 IN NRT CDA

Data sheet

Type of medium Glass
Application on glazing Interior
Adhesive type CDA
Optical property Not reflective
Visibility Transparent
Glare problem Average
Heat problem in summer Low (+4°C)
Thermal insulation in winter No - Not necessary
Solar heat gain in winter Yes - Keep
Limit fading UV + IR + Light