Neutral sputtered dark

Umbra 20

  • Category : Solar
  • Type : Low reflection
  • Shades : Tinted
  • % Light transmission : 23%
  • % Light reflection - outside : 29%
  • % Total solar energy rejected : 67%
Roll width
Roll length

Demonstration Video

Action on the infrared spectrum -- umbra 20 IN

IR rejection test under controlled environment

The infrared lamp (75W) heats two steel plates connected to a thermometer, the whole being placed behind a glass plate (4mm).
The adhesive film presented on this page is stuck on the right side.
Actual test duration: 30 min

info

If the message "This video is not available" appears, refresh the page to see the video.

Data sheet

Simple glazing
clear glass 4mm
Double glazing
clear glass 4/16/4mm
Optical property Low reflection
Shades (out/in) Tinted
Face of application on glazing Inside
Adhesive type CDA
% Light Transmission 23 21
% Glare reduction 75 75
% Light reflection (out/in) 29/26 33/27
Emissivity value 0.82
Winter value U (W/m²°K) 5.70 2.69
Value of solar g factor 0.33 0.49
Shading coefficient 0.38 0.56
% Transmission of solar energy 20 18
% Reflection of solar energy 26 28
% Absorption of solar energy 54 56
% Total solar energy rejected 67 51
% UV Transmission < 1
Colour Rendering Index 99 98
Film thickness (µm) 50
Limited warranty (years) 10

Compatibility on glazing

umbra 20 IN PRT CDA
- Preapproved  |  - Recommended study  |  - Not approved
Single glazing
Clear or tinted
Double glazing
Clear or tinted
Double glazing
Clear Low-E #2
Double glazing
Clear Low-E #3
umbra 20 IN PRT CDA

Data sheet

Type of medium Glass
Application on glazing Interior
Adhesive type CDA
Optical property Low reflective
Visibility Transparent
Glare problem Average
Heat problem in summer Average (+6°C)
Thermal insulation in winter No - Not necessary
Solar heat gain in winter No - Not necessary
Limit fading UV + IR + Light