Demonstration Video
IR rejection test under controlled environment
The infrared lamp (75W) heats two steel plates connected to a thermometer, the whole being placed behind a glass plate (4mm).
The adhesive film presented on this page is stuck on the right side.
Actual test duration: 30 min
If the message "This video is not available" appears, refresh the page to see the video.
Data sheet
| Simple glazing clear glass 4mm |
Double glazing clear glass 4/16/4mm |
|
|---|---|---|
| Optical property | Semi-reflective | |
| Shades (out/in) | Neutral bronze | |
| Face of application on glazing | Inside | |
| Adhesive type | CDA | |
| % Light Transmission | 28 | 26 |
| % Glare reduction | 69 | 68 |
| % Light reflection (out/in) | 36/38 | 38/39 |
| Emissivity value | 0.32 | |
| Winter value U (W/m²°K) | 4.19 | 2.30 |
| Value of solar g factor | 0.27 | 0.38 |
| Shading coefficient | 0.31 | 0.44 |
| % Transmission of solar energy | 20 | 19 |
| % Reflection of solar energy | 41 | 39 |
| % Absorption of solar energy | 39 | 42 |
| % Total solar energy rejected | 73 | 62 |
| % UV Transmission | < 1 | |
| Colour Rendering Index | 92 | 92 |
| Film thickness (µm) | 50 | |
| Limited warranty (years) | 5 | |
Compatibility on glazing
| kryo 20N IN SR CDA | |
|---|---|
| - Preapproved | - Recommended study | - Not approved | |
| Single glazing Clear or tinted |
|
| Double glazing Clear or tinted |
|
| Double glazing Clear Low-E #2 |
|
| Double glazing Clear Low-E #3 |
|
Data sheet
| Type of medium | Glass |
| Application on glazing | Interior |
| Adhesive type | CDA |
| Optical property | Semi-reflective |
| Visibility | Transparent |
| Glare problem | Significant |
| Heat problem in summer | Average (+6°C) |
| Thermal insulation in winter | Yes - Reinforcement |
| Solar heat gain in winter | No - Not necessary |
| Limit fading | UV + IR + Light |