

28.22 € / m²
A true one-way mirror with a reflective outer surface and a non-reflective inner surface, this glazing film will protect sensitive parts from prying eyes. It can also be used as a solar film for cases of extreme heat input.
Demonstration Video
IR rejection test under controlled environment
The infrared lamp (75W) heats two steel plates connected to a thermometer, the whole being placed behind a glass plate (4mm).
The adhesive film presented on this page is stuck on the right side.
Actual test duration: 30 min
Data sheet
Simple glazing clear glass 4mm | Double glazing clear glass 4/16/4mm | |
---|---|---|
Optical property | Reflective | |
Shades (out/in) | Silver / Tinted | |
Face of application on glazing | Outside | |
Adhesive type | HPRA | |
% Light Transmission | 9 | 9 |
% Glare reduction | 90 | 89 |
% Light reflection (out/in) | 58/24 | 58/28 |
Emissivity value | 0.76 | |
Winter value U (W/m²°K) | 5.71 | 2.72 |
Value of solar g factor | 0.16 | 0.11 |
Shading coefficient | 0.18 | 0.12 |
% Transmission of solar energy | 7 | 6 |
% Reflection of solar energy | 56 | 57 |
% Absorption of solar energy | 37 | 37 |
% Total solar energy rejected | 84 | 89 |
% UV Transmission | < 1 | |
Colour Rendering Index | 85 | 84 |
Film thickness (µm) | 90 | |
Limited warranty (years) | 10 |
Compatibility on glazing
one-way mirror EX RST HPRA | |
---|---|
- Preapproved | - Recommended study | - Not approved | |
Single glazing Clear or tinted |
|
Double glazing Clear or tinted |
|
Double glazing Clear Low-E #2 |
|
Double glazing Clear Low-E #3 |
Data sheet
Type of support | Glass |
Glass application | Exterior |
Visibility and opposite | Reflective |
Glare problem | Important |
Heat problem in summer | Excessive (sup. 8°C) |
Thermal insulation in winter | No - Not necessary |
Provides solar heat in winter | No - Not necessary |
Limit fading | UV+IR+Light (Tinted) |